• A PROPOS

  • COACHING

  • COURS EN LIGNE

  • WITCH IN THE CITY

  • BLOG

  • CONTACT

  • More

    Use tab to navigate through the menu items.
    LIVRES
    • Facebook - Grey Circle
    CGV
    Pour voir cela fonctionner, rendez-vous sur votre site en ligne.
    • Catégories
    • Tous les posts
    • Mes posts
    vacuumfurnace1
    19 mai 2020

    Causes of oil trapped in screw vacuum pump

    dans Découvrez votre forum

    Causes of oil trapped in screw vacuum pump Screw vacuum pump in the use of the process, sometimes there will be oil trapped problem, how to solve it?In order to supply oil continuously, screw vacuum pump requires that the overlap coefficient e of gear engagement is greater than 1, that is, when one pair of gears is not disengaged from engagement, the other pair of gears have entered into engagement. In this way, when the screw vacuum pump has two pairs of gears meshing at the same time, a closed volume is formed between the two pairs of gears' tooth direction meshing linesWhen the sealing volume is reduced, the trapped oil is squeezed and the pressure rises sharply, which makes the bearing suddenly subject to a large impact load, and the screw vacuum pump vibrates violently. At this time, the high-pressure oil is squeezed out from all possible leaks, resulting in the power loss of the screw vacuum pump and the oil heating, etcWhen the sealing volume increases, because there is no oil supplement, a local vacuum of the screw vacuum pump is formed, which separates the air dissolved in the oil and forms bubbles. After bubbles are generated in the oil, a series of problems such as noise and cavitation of the screw vacuum pump will be causedThe above situation is the phenomenon of oil trapped in screw vacuum pump, which will seriously affect the working stability and service life of screw vacuum pumpIn order to solve the problem of oil entrapment, two oil entrapment unloading grooves can be milled on the pump cover of screw vacuum pump. The position of the unloading tank should be such that the trapped oil chamber can be connected with the pressure oil chamber through the unloading tank when it is changed from large to small, and can be connected with the oil suction chamber through another unloading tank when the trapped oil chamber is changed from small to large. The distance between the two unloading tanks shall ensure that the oil pressure cavity and the oil suction cavity cannot communicate at any time.Water Ring Vacuum PumpWater Ring Vacuum Pump manufacturersWhat is water ring vacuum pump

    0 réponse1 commentaire
    0
    Commentaires
    1 commentaire

    © MAUD SIMON / Fais ce qu'il te plaît / Witch in the city / My Genius / Little Big Soul, 2019.

    Termes et Conditions/ CGV
    • Facebook - Grey Circle